NTB's Terraced Hills and Valleys Vol. 10

From the maker of NTB's Terraced Hills and Valleys Vol. 9 you get these 6 Terraced Hills and Valleys sets comprised of a 6 sets of 16 connected 24x24 areas arranged in a 4x4 matrix with overlapping borders. One L3DT screenie for each set is provided showing. Each screenie represents 16 areas.

All the sets are variations off the same design map with different parameters.

The arrangement between the areas in each set is:

01|02|03|04
05|06|07|08
09|10|11|12
13|14|15|16

Each set wraps around itself. I.E., left side of area 1 borders right side of area 4. Top of area 1 borders bottom of area 13. Etc.

Should you like a certain section that is split between more than one area try using TerraCoppa to copy/paste the pieces into a new area.

You will probably need to use TerraCoppa to shift areas down because the toolset places water only at -100 to 100 meters in height and these areas are in many instances above 100 meters.

The areas are created in L3DT and imported into the toolset with YATT.

The areas are baked. That's as far as I went. I did not make any adjustments.

There are islands of perfectly walkable terrain separated by cliffs. It's up to the module builder to connect them and clean up the stray walkmesh dookies.

Please feel free to texture, stock, and otherwise modify this humble offering to your hearts content.

Go wild, make it your own, like Magical Wisp did with three of my areas.

Each set spans 960x960 walkable meters wide.

NTB's Terraced Hills and Valleys Vol. 10a:
Altitude Range: 248.15 meters.
L3DT Design Map Settings:

• Average Altitude = 100
• Altitude Range = 60
• Feature Scale = 100
• Noise Strength = 10
• Noise Shape = 0
• Cliffs/Terraces = 80
• Erosion = 30
• Lakes = 100
• Climate = Temperate

NTB's Terraced Hills and Valleys Vol. 10b:
Altitude Range: 248.15 meters.
L3DT Design Map Settings:

• Average Altitude = 100
• Altitude Range = 60
• Feature Scale = 100
• Noise Strength = 10
• Noise Shape = 0
• Cliffs/Terraces = 100
• Erosion = 30
• Lakes = 100
• Climate = Temperate

NTB's Terraced Hills and Valleys Vol. 10c:
Altitude Range: 246.94 meters.
L3DT Design Map Settings:

• Average Altitude = 100
• Altitude Range = 60
• Feature Scale = 100
• Noise Strength = 15
• Noise Shape = 0
• Cliffs/Terraces = 80
• Erosion = 30
• Lakes = 100
• Climate = Temperate

NTB's Terraced Hills and Valleys Vol. 10d:
Altitude Range: 247.88 meters.
L3DT Design Map Settings:

• Average Altitude = 100
• Altitude Range = 60
• Feature Scale = 100
• Noise Strength = 15
• Noise Shape = 0
• Cliffs/Terraces = 100
• Erosion = 30
• Lakes = 100
• Climate = Temperate

NTB's Terraced Hills and Valleys Vol. 10e:
Altitude Range: 252.98 meters.
L3DT Design Map Settings:

• Average Altitude = 100
• Altitude Range = 60
• Feature Scale = 100
• Noise Strength = 20
• Noise Shape = 0
• Cliffs/Terraces = 80
• Erosion = 40
• Lakes = 100
• Climate = Temperate

NTB's Terraced Hills and Valleys Vol. 10f:
Altitude Range: 242.32 meters.
L3DT Design Map Settings:

• Average Altitude = 100
• Altitude Range = 60
• Feature Scale = 100
• Noise Strength = 20
• Noise Shape = 0
• Cliffs/Terraces = 100
• Erosion = 40
• Lakes = 100
• Climate = Temperate