NTB's Hills and Valleys Vol. 00

From the maker of NTB's Terraced Hills and Valleys Vol. 10 comes 6 sets of 16 hill areas.

The screenies show what each set looks like in L3DT. I swapped the sand texture for a mud texture in the toolset.

Each module contains 16 connected 24x24 areas arranged in a 4x4 matrix with overlapping borders.

The arrangement between the areas in each module is:

01|02|03|04
05|06|07|08
09|10|11|12
13|14|15|16

Each set of 16 areas wraps around itself. I.E., left side of area 1 borders right side of area 4. Top of area 1 borders bottom of area 13. Etc.

Should you like a certain section that is split between more than one area try using TerraCoppa to copy/paste the pieces into a new area.

The areas are created in L3DT and imported into the toolset with YATT.

Each set of 16 areas is the same set of areas subjected to increasing erosion and terracing.

The areas are baked. That's as far as I went. I did not make any adjustments.

Please feel free to texture, stock, and otherwise modify this humble offering to your hearts content. Go wild, make it your own, like Magical Wisp did with three of my areas.

Each set of 16 areas spans 960x960 walkable meters wide. The altitude range is 77 to 86 meters.